dmesg - steamos-test, core 2 quad Q9550, Nvidia GT 640
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.18.0-trunk+steamos2-amd64 (debian-kernel@lists.debian.org) (gcc version 4.9.2 (Debian 4.9.2-10+bsos2) ) #1 SMP Debian 3.18.19-0+steamos2 (2015-08-07)
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bfdffbff] usable
BIOS-e820: [mem 0x00000000bfdffc00-0x00000000bfe53bff] ACPI NVS
BIOS-e820: [mem 0x00000000bfe53c00-0x00000000bfe55bff] ACPI data
BIOS-e820: [mem 0x00000000bfe55c00-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fed003ff] reserved
BIOS-e820: [mem 0x00000000fed20000-0x00000000fed9ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x00000001b7ffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: Dell Inc. OptiPlex 760 /0R230R, BIOS A03 04/29/2009
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x1b8000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-D3FFF write-protect
D4000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0BFF00000 mask FFFF00000 uncachable
1 base 0C0000000 mask FC0000000 uncachable
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0xbfdff max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fe710-0x000fe71f] mapped at [ffff8800000fe710]
Base memory trampoline at [ffff880000099000] 99000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01b12000, 0x01b12fff] PGTABLE
BRK [0x01b13000, 0x01b13fff] PGTABLE
BRK [0x01b14000, 0x01b14fff] PGTABLE
init_memory_mapping: [mem 0x1b7e00000-0x1b7ffffff]
[mem 0x1b7e00000-0x1b7ffffff] page 2M
BRK [0x01b15000, 0x01b15fff] PGTABLE
init_memory_mapping: [mem 0x1b4000000-0x1b7dfffff]
[mem 0x1b4000000-0x1b7dfffff] page 2M
init_memory_mapping: [mem 0x180000000-0x1b3ffffff]
[mem 0x180000000-0x1b3ffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xbfdfefff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0xbfbfffff] page 2M
[mem 0xbfc00000-0xbfdfefff] page 4k
init_memory_mapping: [mem 0x100000000-0x17fffffff]
[mem 0x100000000-0x17fffffff] page 2M
BRK [0x01b16000, 0x01b16fff] PGTABLE
BRK [0x01b17000, 0x01b17fff] PGTABLE
RAMDISK: [mem 0x34ce6000-0x3666afff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000FEC00 000024 (v02 DELL )
ACPI: XSDT 0x00000000000FC7EF 000074 (v01 DELL B10K 00000015 ASL 00000061)
ACPI: FACP 0x00000000000FC91F 0000F4 (v03 DELL B10K 00000015 ASL 00000061)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/64 (20140926/tbfadt-618)
ACPI: DSDT 0x00000000FFF1BE4D 0053BE (v01 DELL dt_ex 00001000 INTL 20050624)
ACPI: FACS 0x00000000BFDFFC00 000040
ACPI: SSDT 0x00000000FFF2132A 0000AA (v01 DELL st_ex 00001000 INTL 20050624)
ACPI: APIC 0x00000000000FCA13 000092 (v01 DELL B10K 00000015 ASL 00000061)
ACPI: BOOT 0x00000000000FCAA5 000028 (v01 DELL B10K 00000015 ASL 00000061)
ACPI: ASF! 0x00000000000FCACD 000096 (v32 DELL B10K 00000015 ASL 00000061)
ACPI: MCFG 0x00000000000FCB63 00003E (v01 DELL B10K 00000015 ASL 00000061)
ACPI: HPET 0x00000000000FCBA1 000038 (v01 DELL B10K 00000015 ASL 00000061)
ACPI: TCPA 0x00000000000FCDFD 000032 (v01 DELL B10K 00000015 ASL 00000061)
ACPI: ____ 0x00000000000FCE2F 000030 (v01 DELL B10K 00000015 ASL 00000061)
ACPI: SLIC 0x00000000000FCBD9 000176 (v01 DELL B10K 00000015 ASL 00000061)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x00000001b7ffffff]
NODE_DATA(0) allocated [mem 0x1b7ff9000-0x1b7ffcfff]
[ffffea0000000000-ffffea00061fffff] PMD -> [ffff8801b1800000-ffff8801b6bfffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x1b7ffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009efff]
node 0: [mem 0x00100000-0xbfdfefff]
node 0: [mem 0x100000000-0x1b7ffffff]
Initmem setup node 0 [mem 0x00001000-0x1b7ffffff]
On node 0 totalpages: 1539485
DMA zone: 56 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 10689 pages used for memmap
DMA32 zone: 781823 pages, LIFO batch:31
Normal zone: 10304 pages used for memmap
Normal zone: 753664 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
PM: Registered nosave memory: [mem 0xbfdff000-0xbfdfffff]
PM: Registered nosave memory: [mem 0xbfe00000-0xbfe52fff]
PM: Registered nosave memory: [mem 0xbfe53000-0xbfe53fff]
PM: Registered nosave memory: [mem 0xbfe54000-0xbfe54fff]
PM: Registered nosave memory: [mem 0xbfe55000-0xbfe55fff]
PM: Registered nosave memory: [mem 0xbfe56000-0xbfffffff]
PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfed9ffff]
PM: Registered nosave memory: [mem 0xfeda0000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
PM: Registered nosave memory: [mem 0xfef00000-0xffafffff]
PM: Registered nosave memory: [mem 0xffb00000-0xffffffff]
e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 30 pages/cpu @ffff8801b7c00000 s82112 r8192 d32576 u262144
pcpu-alloc: s82112 r8192 d32576 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1518415
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x3, cntxt size 0x240 using standard form
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 5967056K/6157940K available (5427K kernel code, 1020K rwdata, 1872K rodata, 1232K init, 856K bss, 190884K reserved)
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS:33024 nr_irqs:488 0
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2660.025 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5320.05 BogoMIPS (lpj=10640100)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20140926
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Yama: disabled by default; enable with sysctl kernel.yama.*
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
process: using mwait in idle threads
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 20K (ffffffff81a35000 - ffffffff81a3a000)
ftrace: allocating 22024 entries in 87 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM)2 Quad CPU Q8400 @ 2.66GHz (fam: 06, model: 17, stepping: 0a)
Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (21280.20 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xbfdffc00-0xbfe53bff] (344064 bytes)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
dmi type 0xB1 record - unknown flag
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140926/hwxface-580)
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 1)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000effff]
pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfec00000]
pci_bus 0000:00: root bus resource [mem 0xbff00000-0xdfffffff]
pci_bus 0000:00: root bus resource [mem 0xff980000-0xff980fff]
pci_bus 0000:00: root bus resource [mem 0xff97c000-0xff97ffff]
pci_bus 0000:00: root bus resource [mem 0xfed20000-0xfed9ffff]
pci_bus 0000:00: root bus resource [mem 0xfeda7000-0xfeda7fff]
pci 0000:00:00.0: [8086:2e10] type 00 class 0x060000
DMAR: Forcing write-buffer flush capability
DMAR: Disabling IOMMU for graphics on this chipset
pci 0000:00:01.0: [8086:2e11] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:03.0: [8086:2e14] type 00 class 0x078000
pci 0000:00:03.0: reg 0x10: [mem 0xfeda6000-0xfeda600f 64bit]
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.2: [8086:2e16] type 00 class 0x010185
pci 0000:00:03.2: reg 0x10: [io 0xfe80-0xfe87]
pci 0000:00:03.2: reg 0x14: [io 0xfe90-0xfe93]
pci 0000:00:03.2: reg 0x18: [io 0xfea0-0xfea7]
pci 0000:00:03.2: reg 0x1c: [io 0xfeb0-0xfeb3]
pci 0000:00:03.2: reg 0x20: [io 0xfef0-0xfeff]
pci 0000:00:03.3: [8086:2e17] type 00 class 0x070002
pci 0000:00:03.3: reg 0x10: [io 0xec98-0xec9f]
pci 0000:00:03.3: reg 0x14: [mem 0xfdfd8000-0xfdfd8fff]
pci 0000:00:19.0: [8086:10de] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xfdfe0000-0xfdffffff]
pci 0000:00:19.0: reg 0x14: [mem 0xfdfd9000-0xfdfd9fff]
pci 0000:00:19.0: reg 0x18: [io 0xecc0-0xecdf]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:3a67] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 0x20: [io 0xff20-0xff3f]
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1a.1: [8086:3a68] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 0x20: [io 0xff00-0xff1f]
pci 0000:00:1a.1: System wakeup disabled by ACPI
pci 0000:00:1a.2: [8086:3a69] type 00 class 0x0c0300
pci 0000:00:1a.2: reg 0x20: [io 0xfc00-0xfc1f]
pci 0000:00:1a.2: System wakeup disabled by ACPI
pci 0000:00:1a.7: [8086:3a6c] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 0x10: [mem 0xfdfda000-0xfdfda3ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:3a6e] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfdfdc000-0xfdfdffff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:3a70] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:3a72] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:3a64] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0xff80-0xff9f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:3a65] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0xff60-0xff7f]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:3a66] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0xff40-0xff5f]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:3a6a] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xff980000-0xff9803ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:3a1a] type 00 class 0x060100
pci 0000:00:1f.2: [8086:3a00] type 00 class 0x01018f
pci 0000:00:1f.2: reg 0x10: [io 0xfe00-0xfe07]
pci 0000:00:1f.2: reg 0x14: [io 0xfe10-0xfe13]
pci 0000:00:1f.2: reg 0x18: [io 0xfe20-0xfe27]
pci 0000:00:1f.2: reg 0x1c: [io 0xfe30-0xfe33]
pci 0000:00:1f.2: reg 0x20: [io 0xfec0-0xfecf]
pci 0000:00:1f.2: reg 0x24: [io 0xeca0-0xecaf]
pci 0000:00:1f.3: [8086:3a60] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfdfdb000-0xfdfdb0ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xece0-0xecff]
pci 0000:00:1f.5: [8086:3a06] type 00 class 0x010185
pci 0000:00:1f.5: reg 0x10: [io 0xfe40-0xfe47]
pci 0000:00:1f.5: reg 0x14: [io 0xfe50-0xfe53]
pci 0000:00:1f.5: reg 0x18: [io 0xfe60-0xfe67]
pci 0000:00:1f.5: reg 0x1c: [io 0xfe70-0xfe73]
pci 0000:00:1f.5: reg 0x20: [io 0xfed0-0xfedf]
pci 0000:00:1f.5: reg 0x24: [io 0xecb0-0xecbf]
pci 0000:01:00.0: [10de:1282] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xfc000000-0xfcffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xf0000000-0xf7ffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xf8000000-0xf9ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xdc80-0xdcff]
pci 0000:01:00.0: reg 0x30: [mem 0xfde00000-0xfde7ffff pref]
pci 0000:01:00.1: [10de:0e0f] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfddfc000-0xfddfffff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xfc000000-0xfdefffff]
pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf9ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [mem 0xfbf00000-0xfbffffff]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000effff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000f0000-0x000fffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfec00000] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xbff00000-0xdfffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xff980000-0xff980fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xff97c000-0xff97ffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed20000-0xfed9ffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfeda7000-0xfeda7fff] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15)
ACPI: Enabled 2 GPEs in block 00 to 3F
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:00:03.0: can't claim BAR 0 [mem 0xfeda6000-0xfeda600f 64bit]: no compatible bridge window
Expanded resource reserved due to conflict with PCI Bus 0000:00
Expanded resource reserved due to conflict with PCI Bus 0000:00
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0xbfdffc00-0xbfffffff]
HPET: 8 timers in total, 5 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 28, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
hpet: hpet2 irq 24 for MSI
hpet: hpet3 irq 25 for MSI
hpet: hpet4 irq 26 for MSI
hpet: hpet5 irq 27 for MSI
Switched to clocksource hpet
pnp: PnP ACPI init
system 00:00: [io 0x0800-0x085f] could not be reserved
system 00:00: [io 0x0c00-0x0c7f] has been reserved
system 00:00: [io 0x0860-0x08ff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: [dma 0 disabled]
pnp 00:02: Plug and Play ACPI device, IDs PNP0401 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
pnp: PnP ACPI: found 4 devices
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 15: assigned [mem 0xfa000000-0xfa1fffff 64bit pref]
pci 0000:00:1c.1: BAR 15: assigned [mem 0xfa200000-0xfa3fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:00:1c.1: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:03.0: BAR 0: assigned [mem 0xfa400000-0xfa40000f 64bit]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xfc000000-0xfdefffff]
pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf9ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [mem 0xfbf00000-0xfbffffff]
pci 0000:00:1c.0: bridge window [mem 0xfa000000-0xfa1fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.1: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:1c.1: bridge window [mem 0xfa200000-0xfa3fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 04]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000effff]
pci_bus 0000:00: resource 8 [mem 0x000f0000-0x000fffff]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfec00000]
pci_bus 0000:00: resource 10 [mem 0xbff00000-0xdfffffff]
pci_bus 0000:00: resource 11 [mem 0xff980000-0xff980fff]
pci_bus 0000:00: resource 12 [mem 0xff97c000-0xff97ffff]
pci_bus 0000:00: resource 13 [mem 0xfed20000-0xfed9ffff]
pci_bus 0000:00: resource 14 [mem 0xfeda7000-0xfeda7fff]
pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfdefffff]
pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf9ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:02: resource 1 [mem 0xfbf00000-0xfbffffff]
pci_bus 0000:02: resource 2 [mem 0xfa000000-0xfa1fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:03: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:03: resource 2 [mem 0xfa200000-0xfa3fffff 64bit pref]
pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000effff]
pci_bus 0000:04: resource 8 [mem 0x000f0000-0x000fffff]
pci_bus 0000:04: resource 9 [mem 0xf0000000-0xfec00000]
pci_bus 0000:04: resource 10 [mem 0xbff00000-0xdfffffff]
pci_bus 0000:04: resource 11 [mem 0xff980000-0xff980fff]
pci_bus 0000:04: resource 12 [mem 0xff97c000-0xff97ffff]
pci_bus 0000:04: resource 13 [mem 0xfed20000-0xfed9ffff]
pci_bus 0000:04: resource 14 [mem 0xfeda7000-0xfeda7fff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 26132K (ffff880034ce6000 - ffff88003666b000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xbbdff000-0xbfdff000] (64MB) mapped at [ffff8800bbdff000-ffff8800bfdfefff]
Simple Boot Flag at 0x7a set to 0x80
microcode: CPU0 sig=0x1067a, pf=0x10, revision=0xa07
microcode: CPU1 sig=0x1067a, pf=0x10, revision=0xa07
microcode: CPU2 sig=0x1067a, pf=0x10, revision=0xa07
microcode: CPU3 sig=0x1067a, pf=0x10, revision=0xa07
microcode: Microcode Update Driver: v2.00 , Peter Oruba
futex hash table entries: 2048 (order: 5, 131072 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1441146672.056:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 11705
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: irq 29 for MSI/MSI-X
pcieport 0000:00:1c.0: irq 30 for MSI/MSI-X
pcieport 0000:00:1c.1: irq 31 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
simple-framebuffer simple-framebuffer.0: framebuffer at 0xf9000000, 0x300000 bytes, mapped to 0xffffc90010e80000
simple-framebuffer simple-framebuffer.0: format=a8r8g8b8, mode=1024x768x32, linelength=4096
Console: switching consoles 2-6 to frame buffer device
simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
intel_idle: does not run on family 6 model 23
GHES: HEST is not enabled!
00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
0000:00:03.3: ttyS1 at I/O 0xec98 (irq = 17, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one day, 242 bytes nvram, hpet irqs
ledtrig-cpu: registered to indicate activity on CPUs
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
TCP: cubic registered
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
mpls_gso: MPLS GSO support
registered taskstats version 1
rtc_cmos 00:01: setting system clock to 2015-09-01 22:31:13 UTC (1441146673)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1232K (ffffffff81901000 - ffffffff81a35000)
Write protecting the kernel read-only data: 8192k
Freeing unused kernel memory: 704K (ffff880001550000 - ffff880001600000)
Freeing unused kernel memory: 176K (ffff8800017d4000 - ffff880001800000)
systemd-udevd[74]: starting version 215
random: systemd-udevd urandom read with 8 bits of entropy available
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
ACPI: Power Button [VBTN]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
wmi: Mapper loaded
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
SCSI subsystem initialized
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0: irq 32 for MSI/MSI-X
uhci_hcd: USB Universal Host Controller Interface driver
ehci-pci: EHCI PCI platform driver
libata version 3.00 loaded.
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:23:ae:9f:48:fb
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 8, PHY: 8, PBA No: 8021FF-0FF
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1a.0: detected 2 ports
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff20
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 3.18.0-trunk+steamos2-amd64 uhci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1a.1: detected 2 ports
uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000ff00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 3.18.0-trunk+steamos2-amd64 uhci_hcd
usb usb2: SerialNumber: 0000:00:1a.1
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.2: detected 2 ports
uhci_hcd 0000:00:1a.2: irq 22, io base 0x0000fc00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.18.0-trunk+steamos2-amd64 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff80
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.18.0-trunk+steamos2-amd64 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000ff60
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.18.0-trunk+steamos2-amd64 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.1
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 3.18.0-trunk+steamos2-amd64 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.2
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 7
ehci-pci 0000:00:1a.7: debug port 1
ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
ehci-pci 0000:00:1a.7: irq 22, io mem 0xfdfda000
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: EHCI Host Controller
usb usb7: Manufacturer: Linux 3.18.0-trunk+steamos2-amd64 ehci_hcd
usb usb7: SerialNumber: 0000:00:1a.7
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 6 ports detected
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 8
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xff980000
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: EHCI Host Controller
usb usb8: Manufacturer: Linux 3.18.0-trunk+steamos2-amd64 ehci_hcd
usb usb8: SerialNumber: 0000:00:1d.7
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 6 ports detected
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
scsi host0: ata_generic
scsi host1: ata_generic
ata1: PATA max UDMA/100 cmd 0xfe80 ctl 0xfe90 bmdma 0xfef0 irq 18
ata2: PATA max UDMA/100 cmd 0xfea0 ctl 0xfeb0 bmdma 0xfef8 irq 18
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
scsi host2: ata_piix
scsi host3: ata_piix
ata3: SATA max UDMA/133 cmd 0xfe00 ctl 0xfe10 bmdma 0xfec0 irq 18
ata4: SATA max UDMA/133 cmd 0xfe20 ctl 0xfe30 bmdma 0xfec8 irq 18
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
usb 8-1: new high-speed USB device number 2 using ehci-pci
scsi host4: ata_piix
scsi host5: ata_piix
ata5: SATA max UDMA/133 cmd 0xfe40 ctl 0xfe50 bmdma 0xfed0 irq 18
ata6: SATA max UDMA/133 cmd 0xfe60 ctl 0xfe70 bmdma 0xfed8 irq 18
usb 8-1: New USB device found, idVendor=13fe, idProduct=3100
usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 8-1: Product: Patriot Memory
usb 8-1: Manufacturer:
usb 8-1: SerialNumber: 079304BA0271
usb-storage 8-1:1.0: USB Mass Storage device detected
scsi host6: usb-storage 8-1:1.0
usbcore: registered new interface driver usb-storage
tsc: Refined TSC clocksource calibration: 2659.983 MHz
ata5: SATA link down (SStatus 4 SControl 300)
ata6: SATA link down (SStatus 4 SControl 300)
ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.01: SATA link down (SStatus 4 SControl 300)
ata4.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.01: SATA link down (SStatus 4 SControl 300)
ata4.01: link offline, clearing class 3 to NONE
ata3.00: ATA-7: WDC WD800JD-75MSA3, 10.01E04, max UDMA/133
ata3.00: 156250000 sectors, multi 8: LBA48 NCQ (depth 0/32)
ata4.00: ATAPI: ASUS DRW-24B1ST c, 1.05, max UDMA/100
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA WDC WD800JD-75MS 1E04 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 156250000 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata4.00: configured for UDMA/100
scsi 3:0:0:0: CD-ROM ASUS DRW-24B1ST c 1.05 PQ: 0 ANSI: 5
sr 3:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sd 2:0:0:0: Attached scsi generic sg0 type 0
sr 3:0:0:0: Attached scsi generic sg1 type 5
sda: sda1 sda2 < sda5 sda6 sda7 >
sd 2:0:0:0: [sda] Attached SCSI disk
usb 4-2: new full-speed USB device number 2 using uhci_hcd
usb 4-2: New USB device found, idVendor=046d, idProduct=c52b
usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-2: Product: USB Receiver
usb 4-2: Manufacturer: Logitech
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-2/input2
input: Logitech Unifying Device. Wireless PID:4024 as /devices/pci0000:00/0000:00:1d.0/usb4/4-2/4-2:1.2/0003:046D:C52B.0003/0003:046D:C52B.0004/input/input4
logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4024] on usb-0000:00:1d.0-2:1
scsi 6:0:0:0: Direct-Access Patriot Memory PMAP PQ: 0 ANSI: 0 CCS
sd 6:0:0:0: Attached scsi generic sg2 type 0
sd 6:0:0:0: [sdb] Attached SCSI removable disk
Switched to clocksource tsc
floppy0: no floppy controllers found
PM: Starting manual resume from disk
PM: Hibernation image partition 8:6 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
random: nonblocking pool is initialized
fuse init (API version 7.23)
systemd-udevd[203]: starting version 215
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
snd_hda_intel 0000:00:1b.0: irq 33 for MSI/MSI-X
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
mei_me 0000:00:03.0: irq 34 for MSI/MSI-X
parport_pc 00:02: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
Monitor-Mwait will be used to enter C-1 state
tsc: Marking TSC unstable due to TSC halts in idle
ACPI: acpi_idle registered with cpuidle
Switched to clocksource hpet
input: PC Speaker as /devices/platform/pcspkr/input/input6
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input7
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input8
[drm] Initialized drm 1.1.0 20060810
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000828-0x000000000000082D (\GLBC) (20140926/utaddress-254)
ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x000000000000082A-0x000000000000082A (\SACT) (20140926/utaddress-254)
ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000828-0x0000000000000828 (\SSTS) (20140926/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x00000000000008B0-0x00000000000008BF conflicts with OpRegion 0x00000000000008B8-0x00000000000008BB (\GIC2) (20140926/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000880-0x00000000000008AF conflicts with OpRegion 0x000000000000088C-0x000000000000088F (\GIC1) (20140926/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
input: Dell WMI hotkeys as /devices/virtual/input/input9
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a ICH10D TCO device (Version=2, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
sound hdaudioC0D2: autoconfig: line_outs=1 (0x12/0x0/0x0/0x0/0x0) type:line
sound hdaudioC0D2: speaker_outs=1 (0x13/0x0/0x0/0x0/0x0)
sound hdaudioC0D2: hp_outs=1 (0x11/0x0/0x0/0x0/0x0)
sound hdaudioC0D2: mono: mono_out=0x0
sound hdaudioC0D2: inputs:
sound hdaudioC0D2: Mic=0x14
sound hdaudioC0D2: Line=0x15
i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D2/input10
input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
ppdev: user-space parallel port driver
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
kvm: disabled by bios
kvm: disabled by bios
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 352.30 Tue Jul 21 18:53:45 PDT 2015
Adding 9999356k swap on /dev/sda6. Priority:-1 extents:1 across:9999356k FS
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
systemd-journald[197]: Received request to flush runtime journal from PID 1
floppy0: no floppy controllers found
work still pending
cfg80211: Calling CRDA to update world regulatory domain
e1000e 0000:00:19.0: irq 32 for MSI/MSI-X
e1000e 0000:00:19.0: irq 32 for MSI/MSI-X
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
nvidia 0000:01:00.0: irq 35 for MSI/MSI-X
NVRM: Your system is not currently configured to drive a VGA console
NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
NVRM: requires the use of a text-mode VGA console. Use of other console
NVRM: drivers including, but not limited to, vesafb, may result in
NVRM: corruption and stability problems, and is not supported.
usb 8-1: USB disconnect, device number 2
usb 8-1: new high-speed USB device number 4 using ehci-pci
usb 8-1: New USB device found, idVendor=13fe, idProduct=3100
usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 8-1: Product: Patriot Memory
usb 8-1: Manufacturer:
usb 8-1: SerialNumber: 079304BA0271
usb-storage 8-1:1.0: USB Mass Storage device detected
scsi host7: usb-storage 8-1:1.0
scsi 7:0:0:0: Direct-Access Patriot Memory PMAP PQ: 0 ANSI: 0 CCS
sd 7:0:0:0: Attached scsi generic sg2 type 0
sd 7:0:0:0: [sdb] 15663104 512-byte logical blocks: (8.01 GB/7.46 GiB)
sd 7:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 7:0:0:0: [sdb] No Caching mode page found
sd 7:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1 sdb2
sd 7:0:0:0: [sdb] Attached SCSI removable disk
FAT-fs (sdb2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
perf interrupt took too long (2502 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
usb 8-1: USB disconnect, device number 4
FAT-fs (sdb2): unable to read boot sector to mark fs as dirty
usb 8-1: new high-speed USB device number 5 using ehci-pci
usb 8-1: New USB device found, idVendor=13fe, idProduct=3100
usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 8-1: Product: Patriot Memory
usb 8-1: Manufacturer:
usb 8-1: SerialNumber: 079304BA0271
usb-storage 8-1:1.0: USB Mass Storage device detected
scsi host8: usb-storage 8-1:1.0
scsi 8:0:0:0: Direct-Access Patriot Memory PMAP PQ: 0 ANSI: 0 CCS
sd 8:0:0:0: Attached scsi generic sg2 type 0
sd 8:0:0:0: [sdb] 15663104 512-byte logical blocks: (8.01 GB/7.46 GiB)
sd 8:0:0:0: [sdb] Write Protect is off
sd 8:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 8:0:0:0: [sdb] No Caching mode page found
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1 sdb2
sd 8:0:0:0: [sdb] Attached SCSI removable disk
FAT-fs (sdb2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
FAT-fs (sdb2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
usb 8-1: USB disconnect, device number 5
usb 8-1: new high-speed USB device number 6 using ehci-pci
usb 8-1: New USB device found, idVendor=13fe, idProduct=3100
usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 8-1: Product: Patriot Memory
usb 8-1: Manufacturer:
usb 8-1: SerialNumber: 079304BA0271
usb-storage 8-1:1.0: USB Mass Storage device detected
scsi host9: usb-storage 8-1:1.0
scsi 9:0:0:0: Direct-Access Patriot Memory PMAP PQ: 0 ANSI: 0 CCS
sd 9:0:0:0: Attached scsi generic sg2 type 0
sd 9:0:0:0: [sdb] 15663104 512-byte logical blocks: (8.01 GB/7.46 GiB)
sd 9:0:0:0: [sdb] Write Protect is off
sd 9:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 9:0:0:0: [sdb] No Caching mode page found
sd 9:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1 sdb2
sd 9:0:0:0: [sdb] Attached SCSI removable disk
FAT-fs (sdb2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
FAT-fs (sdb2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
sdb:
FAT-fs (sdb): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
sdb:
FAT-fs (sdb): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
sdb:
FAT-fs (sdb): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
sdb:
FAT-fs (sdb): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
sdb:
FAT-fs (sdb): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
usb 8-1: USB disconnect, device number 6
FAT-fs (sdb): Directory bread(block 30566) failed
FAT-fs (sdb): Directory bread(block 30567) failed
FAT-fs (sdb): Directory bread(block 30568) failed
FAT-fs (sdb): Directory bread(block 30569) failed
FAT-fs (sdb): Directory bread(block 30570) failed
FAT-fs (sdb): Directory bread(block 30571) failed
FAT-fs (sdb): Directory bread(block 30572) failed
FAT-fs (sdb): Directory bread(block 30573) failed
usb 8-1: new high-speed USB device number 7 using ehci-pci
usb 8-1: New USB device found, idVendor=13fe, idProduct=3100
usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 8-1: Product: Patriot Memory
usb 8-1: Manufacturer:
usb 8-1: SerialNumber: 079304BA0271
usb-storage 8-1:1.0: USB Mass Storage device detected
scsi host10: usb-storage 8-1:1.0
scsi 10:0:0:0: Direct-Access Patriot Memory PMAP PQ: 0 ANSI: 0 CCS
sd 10:0:0:0: Attached scsi generic sg2 type 0
sd 10:0:0:0: [sdc] 15663104 512-byte logical blocks: (8.01 GB/7.46 GiB)
sd 10:0:0:0: [sdc] Write Protect is off
sd 10:0:0:0: [sdc] Mode Sense: 23 00 00 00
sd 10:0:0:0: [sdc] No Caching mode page found
sd 10:0:0:0: [sdc] Assuming drive cache: write through
sdc:
sd 10:0:0:0: [sdc] Attached SCSI removable disk
FAT-fs (sdc): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
FAT-fs (sdc): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
FAT-fs (sdb): Directory bread(block 30566) failed
FAT-fs (sdb): Directory bread(block 30567) failed
FAT-fs (sdb): Directory bread(block 30568) failed
FAT-fs (sdb): Directory bread(block 30569) failed
FAT-fs (sdb): Directory bread(block 30570) failed
FAT-fs (sdb): Directory bread(block 30571) failed
FAT-fs (sdb): Directory bread(block 30572) failed
FAT-fs (sdb): Directory bread(block 30573) failed
FAT-fs (sdb): Directory bread(block 30566) failed
FAT-fs (sdb): Directory bread(block 30567) failed
sdc:
FAT-fs (sdc): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!